At this post, you will find some of the examples of replacing failed disk under Solaris volume manager. Not that failed disk is under a mirrored configuration.....
Veritas Cluster Group %s has agent(s) that failed on system %s
These messages appear on the veritas cluster management console when you try to bring up a resource group that agents faulted. Also, these messages appear on engine_A.log file....
Oracle Solaris T5 How to clear Fault on SP
If Oracle ILOM detects the FRU replacement, it ‘ll automatically clear the fault so Manuel clearing not needed. In some cases, you need to clear fault manually if it depends on a BUG or something like this.....
How to use truss command to analyse process
Under some conditions, the process can go down without any apparent reason. There is typically no core file to analyze why the process goes down. In my case, I tried to show how to find sighup signal for a process....
Oracle Solaris M-Series XSCF Console Firmware Upgrade
This post shows step by step how to upgrade XSCF(Extended System Control Facility) which used for monitoring and control hardware, check domains’ stat....
How to create metadevice and add swap on Oracle Solaris
The following post describes how to add or create swap device in a UFS for SVM environment. Follow these steps when you need to add more swap devices.....